Our Store

Textured Aluminum** Bracket

The gadget spec URL could not be found
* All orders will be treated as
PRE-ORDER unless indicated differently. See PRE-ORDER Terms HERE

Your Local Reseller
Your Local Reseller

 ** 5052-H32 Aluminum is widely used for cooking utensils, food processing equipment, storage tanks, truck and trailer components, mail boxes, aircraft components, electronic chassis, boat hulls, deck houses, hatch covers, pressure vessels, ladders, railings, frames, drip pans, tool boxes, truck bumpers, inner and outer body panels and components in truck and auto industries, kitchen equipment, decorative trim, architectural uses, signage applications, and any number of parts and application requiring strength and good formability at reasonable cost.

5052 is often referred to as "Anodize Quality Aluminum", as it has excellent finishing qualities and anodized coatings are bright and clear. The major alloying element in 5052 is magnesium in sufficient quantities to cause substantial lowering of the melting point without producing brittleness. When magnesium is used as the major alloying element, or in combination with manganese, the result is a moderate to high strength non-heat treatable aluminum alloy. 5052 is far stronger than the 1100 or 3000 series aluminums, yet forms with reasonable bend radii. Weldability is very good and 5052 has good resistance to corrosion, especially in salt-water / marine atmospheres.


Manganese (Mn)


Silicon (Si)


Chromium (Cr) Copper (Cu)


Iron (Fe)


Zinc (Zn)


Magnesium (Mg)
0.1 0.25 0.15-0.35 0.1 0.4 0.1 2.2-2.8

5052-H32 Conforms to ASTM BB209, QQ-A-250/8, AMS 4015, AMS 4016, AMS 4017


Tensile Strength (PSI) Yield Strength (PSI) Elongation in 2"
33,000 28,000 12

Min 90 degree cold bend radius (for .064" thick): 1T The above values are average and may be considered as representative of 5052-H32

Subpages (1): Policies
Mladen Lijesnic,
Apr 26, 2012, 11:55 AM